CPOTE 2020 has concluded· conference archive Portal version 2026.11.09.01

Register

Abstract CPOTE2020-1056-A

Investigation of the influence of the selected parameters on Tesla turbine characteristics

  • Krzysztof Rusin
  • Włodzimierz Wróblewski
  • Mirosław Majkut
  • Michał Strozik
  • Sebastian Rulik
  1. Silesian University of Technology, Poland
One of the keys to efficient systems based on renewable energy sources is an expander. On the one hand, it has to be reliable, efficient and erosion resistant but on the other hand, it has to be cheap so the system is economically viable. Tesla radial turbine could be a potential candidate for this purpose. In the paper, a comprehensive numerical and experimental analysis of the Tesla turbine is presented. The turbine rotor has 5 discs with 160mm in diameter and changeable inter-disc gaps within range 0.3-1.2mm. It is supplied with four converging nozzles, each providing air to all inter-disc gaps. The turbine works in the subsonic regime because the maximal pressure ratio is equal to 1.8 and the inlet temperature is equal to 298K, which results in maximal generate power on the level of 200W. Results from the experiment are compared to numerical analysis. The simulations are performed with the use of Ansys CFX commercial software, which is based on the finite volume method. Comparison of power and efficiency characteristics are in good agreement. An attempt to find the influence of different geometrical and thermodynamic parameters on power and efficiency is presented in the paper.

Keywords

  • Tesla turbine
  • Flow between co-rotating discs
  • Bladeless turbine
  • Efficiency characteristic
  • Internal flow

CPOTE 2020 has concluded

Registration is no longer available

The conference took place on 21–24 September 2020 (Online). This website is kept as a public archive, so the conference system with registration, log-in and submissions is closed.

Questions about this edition? Write to cpote@s-conferences.eu.

Display settings

Theme
Contrast · WCAG level

WCAG level A sets no colour-contrast requirement, so “A” is the standard design. AA guarantees at least 4.5:1 for all text, AAA at least 7:1 and turns off moving backgrounds. Your choice is remembered on this device only.

↑↓ navigateEnter openCPOTE 2020 archive